How do I set up and configure the TRENDnet Motorized Varifocal Dome Network Camera? (TRENDnet Motorized Varifocal Dome Network Camera User Guide)

Answer

manuals.plus

Jan 06, 2025 - 02:59 AM


To set up and configure the TRENDnet Motorized Varifocal Dome Network Camera, please follow the steps below:

1. Mount the Camera:
   - Choose a suitable location for mounting the camera, ensuring it is secure and provides a good view of the desired area.
   - Use the included mounting hardware to attach the camera to the desired surface, such as a wall or ceiling.

2. Connect the Camera:
   - Connect one end of an Ethernet cable to the camera's LAN port and the other end to your network router or switch.
   - Connect the camera to a power source using the included power adapter.

3. Access the Camera:
   - Ensure that your computer or mobile device is connected to the same network as the camera.
   - Open a web browser and enter the camera's IP address, which can be found in the user manual or obtained through a network scanning tool.
   - Log in to the camera's web interface using the default username and password provided in the user manual.

4. Configure Camera Settings:
   - Once logged in, you can access the camera's settings to customize various parameters, such as resolution, frame rate, motion detection, and network settings.
   - Refer to the user manual for detailed instructions on how to navigate the camera's web interface and configure specific settings.

5. View and Manage Camera Feeds:
   - To view the camera's live feed, go to the camera's web interface and select the appropriate option.
   - You can also use the provided software or mobile app to access and manage the camera's feeds remotely.

Note: It is recommended to consult the user manual for more detailed instructions and troubleshooting tips specific to your model of the TRENDnet Motorized Varifocal Dome Network Camera.