User Manual Q&AAnswer
Jan 06, 2025 - 02:45 AM
To connect your Powerbass XL-800 UTV Soundbar to your device via Bluetooth, follow these steps:
1. Turn on the soundbar by holding the power button for 3-5 seconds. You will hear an audible beep to confirm that the soundbar is on.
2. Press the Bluetooth button momentarily. You will hear an audible sequence of tones and see flashing back lights, indicating that the soundbar is ready to pair with your device.
3. On your device, go to the Bluetooth settings and search for either the XL-800 or XL-1000 signal to pair. Once paired, you will hear an audible beep to confirm that the soundbar and your Bluetooth device have successfully paired.
4. After the pairing process is complete, you can use either the main controller on the soundbar or your connected device to control volume, track selection, and pause/mute functions.
Please note that if you are using an optional external controller (XL-SBCON), the same functions apply. The connection of an external controller does not bypass the main controller, and both can be used along with your connected device.
For more detailed instructions, please refer to the "Bluetooth Pairing and Operation" section in the Powerbass XL-800 UTV Soundbar Operational Guide.
Add New Comment