User Manual Q&AAnswer
Jan 06, 2025 - 02:42 AM
To connect your Powerbass XL-1000 UTV Soundbar to a Bluetooth device, please follow these steps:
1. Turn on the soundbar by holding the power button for 3-5 seconds. You will hear an audible beep to confirm that the soundbar is on.
2. Press the Bluetooth button on the soundbar momentarily. You will hear an audible sequence of tones, and the backlights will flash, indicating that the soundbar is ready to pair with a Bluetooth device.
3. On your Bluetooth device (e.g., phone, tablet, or MP3 player), go into the Bluetooth settings and search for either the XL-800 or XL-1000 signal to pair. Select the appropriate signal to initiate the pairing process.
4. Once paired, you will hear an audible beep to confirm that the soundbar and your Bluetooth device have successfully paired.
5. You can now use either the main controller on the soundbar or your connected device to control the volume, track selection, and pause/mute functions.
Note: If you are using an optional external controller (XL-SBCON), the same functions apply. The connection of an external controller does not bypass the main controller, and both can be used simultaneously with your connected device.
If you encounter any issues during the pairing process, please refer to the Troubleshooting section of the operational manual or contact PowerBass customer service for further assistance.
Add New Comment