User Manual Q&AAnswer
Jan 06, 2025 - 02:33 AM
To set up and match the receiver and transmitter for the Pyle PDWM1950 Wireless Microphone System, please follow the steps below:
1. Make sure the receiver is powered OFF.
2. On the transmitter side, press and hold the frequency-change button.
3. While holding the frequency-change button, press and hold the power button until the display starts flashing.
4. Turn ON the receiver and wait for 3-5 seconds.
5. Return to the transmitter side and re-press the frequency-change button.
6. The matching is successful if the RF light is ON or the LED display shows the frequency. If not, repeat steps 1 to 5.
It's important to note that this matching process is only applicable to some models of the Pyle PDWM1950 Wireless Microphone System. Make sure to refer to the user manual for specific instructions related to your model.
For more detailed information and troubleshooting tips, please refer to the user manual provided with the product.
Add New Comment