User Manual Q&AAnswer
Jan 06, 2025 - 01:52 AM
To wire the Enrock EHDRAB98-13 Harley Davidson Single-DIN Stereo Installation Kit to your aftermarket radio, please follow these steps:
1. Connect the Black wire from the wiring harness to the ground wire of your aftermarket radio.
2. Connect the Yellow wire from the wiring harness to the battery wire of your aftermarket radio.
3. Connect the Red wire from the wiring harness to the accessory wire of your aftermarket radio.
4. Connect the White wire from the wiring harness to the left front positive speaker output of your aftermarket radio.
5. Connect the White/Black wire from the wiring harness to the left front negative speaker output of your aftermarket radio.
6. Connect the Gray wire from the wiring harness to the right front positive speaker output of your aftermarket radio.
7. Connect the Gray/Black wire from the wiring harness to the right front negative speaker output of your aftermarket radio.
Please refer to the Enrock EHDRAB98-13 Harley Davidson Single-DIN Stereo Installation Kit user manual for more detailed instructions and illustrations.
Add New Comment