User Manual Q&AAnswer
Jan 06, 2025 - 01:49 AM
To charge the Uniden SX307-3C Walkie Talkies, you have two options depending on the model you have.
1. For radios with a micro-USB Y-cable:
- Plug one branch of the micro-USB Y-Cable into each radio's micro-USB charge port.
- Insert the other end (USB) into a USB power source (computer, phone charger, etc - not included).
- Charge the batteries for 16 hours and disconnect the radio from the Y-cable after charging.
2. For radios with a charging cradle:
- Connect the AC adapter to the DC IN 9V jack on the charger and to a standard 120V wall outlet.
- Set the charging cradle on the desk or tabletop, and place the radio in the charging cradle with the keypad facing forward.
- Make sure that the LED illuminates. Charge the batteries for 16 hours and remove the radio from the charging cradle after charging.
Note: Neither the radio nor the charging cradle is waterproof. If the charging cradle falls into water, unplug it before attempting to remove it from the water. Allow the cradle to dry completely before reconnecting the power. Wipe off dirt or shake the water from your radio before placing it in the charging cradle if your radio is soiled or wet.
Add New Comment