User Manual Q&AAnswer
Jan 06, 2025 - 01:48 AM
To connect the HiVi-Swans M200MKII WiFi Powered Bluetooth Speakers to your computer or other sound source, follow these steps:
1. Insert the RCA connectors of the RCA to 3.5mm cable into the audio input terminals of the active speaker, with the red connector going into the red terminal and the white connector going into the white terminal.
2. Insert the 3.5mm stereo jack of the RCA to 3.5mm cable into the stereo output of your computer or other sound source.
3. Make sure the power switch on the speakers is off.
4. Plug the power cable into the power outlet.
5. Turn on your computer or other sound source.
6. Turn on the volume control on the speakers to the minimum (0) position.
7. Play your desired audio source (e.g., MP3, CD) on your computer or sound source.
8. Gradually turn up the volume control on the speakers to your desired listening level.
Note: It is recommended to use a high-quality sound card for the best sound quality. Using a poor quality sound card may degrade the sound quality.
For more detailed instructions and illustrations, please refer to the user manual provided with the HiVi-Swans M200MKII WiFi Powered Bluetooth Speakers.
Add New Comment