User Manual Q&AAnswer
Jan 06, 2025 - 01:42 AM
To connect your Acoustic Audio PSW600-15 subwoofer to your receiver, you have a few options depending on the available connections on your receiver. Here are the step-by-step instructions for each option:
Option 1: Connection with Audio Cable (recommended)
1. Make sure your receiver has a Subwoofer Out jack.
2. Locate the subwoofer output jack on the back of your receiver.
3. Using a standard audio cable, connect the subwoofer output on the back of your receiver to the Line-In jack on the back of the subwoofer.
4. If your receiver has only one subwoofer out jack, you may need to use a Y splitter adapter to connect both the left and right channels to the Line-In jack on the subwoofer.
Option 2: Connection with Speaker Wire
1. Connect speaker wires from the receiver's front left and right speaker outputs to the subwoofer's Speaker Level-In connections.
2. Connect the left channel to the left input and the right channel to the right input on the subwoofer.
3. If your receiver has speaker B outputs, you can connect your main speakers to those outputs. Otherwise, you can connect your main speakers to the connections on the subwoofer, which will send the audio signal to the main speakers while funneling the low bass frequencies to the subwoofer.
Option 3: Connection with LFE
1. Connect the LFE output on your receiver to the LFE input on the back of the subwoofer using a double insert RCA cable.
2. Connect speaker wires from the receiver's front left and right speaker outputs to the subwoofer's speaker inputs.
3. Connect the left channel to the left input and the right channel to the right input on the subwoofer.
Please note that you should only use one of the above options at a time. Choose the option that best suits your receiver's available connections.
For more detailed information and diagrams, please refer to the user manual of your Acoustic Audio PSW600-15 subwoofer.
Add New Comment