How do I install the DS18 AUDIO PRO-H8EDGE Mid-High Loudspeaker? (DS18 AUDIO PRO-H8EDGE Loudspeaker 550W Operational Manual)

Answer

manuals.plus

Jan 06, 2025 - 01:27 AM

To install the DS18 AUDIO PRO-H8EDGE Mid-High Loudspeaker, follow these steps:

1. Determine the mounting location: Choose a suitable location for the speaker, keeping in mind the desired sound projection and aesthetics. The PRO-H8EDGE is designed for flush mounting.

2. Prepare the mounting surface: Ensure that the mounting surface is clean and free from any debris or obstructions.

3. Mark the mounting holes: Place the speaker on the mounting surface and mark the locations for the mounting holes using a pencil or marker. The PRO-H8EDGE has mounting holes on its flange for secure installation.

4. Drill pilot holes: Use an appropriate drill bit to drill pilot holes at the marked locations. The size of the pilot holes should match the screws or bolts you will be using for mounting.

5. Attach the speaker: Align the mounting holes on the speaker with the pilot holes on the mounting surface. Securely fasten the speaker using screws or bolts, ensuring a tight fit.

6. Connect the speaker: Depending on your audio setup, connect the speaker wires to the appropriate terminals on the back of the PRO-H8EDGE. Refer to the manual for detailed instructions on wiring connections.

7. Test the speaker: Once the installation is complete, test the speaker by playing audio through it. Adjust the volume and settings as desired for optimal sound quality.

Please note that these instructions are a general guide, and it is always recommended to refer to the operational manual provided with the product for specific installation instructions and wiring diagrams.