User Manual Q&AAnswer
Jan 06, 2025 - 01:19 AM
To program channels into the Standard Horizon HX210E VHF Handheld, please follow the steps below:
1. Turn on the radio by pressing and holding the Power button until the unit powers on.
2. Press the Menu button to enter the menu mode.
3. Use the Up or Down arrow keys to navigate to the "Channel" option and press the Select button.
4. Use the Up or Down arrow keys to select the desired channel number, then press the Select button.
5. Use the Up or Down arrow keys to select the desired frequency for the channel, then press the Select button.
6. Use the Up or Down arrow keys to select the desired transmit power level (High or Low), then press the Select button.
7. Repeat steps 4-6 to program additional channels if needed.
8. Once you have finished programming the channels, press the Menu button to exit the menu mode.
Please note that the above steps are a general guide, and the specific instructions may vary slightly depending on the firmware version of your HX210E VHF Handheld. For more detailed instructions and illustrations, please refer to the user manual provided with the product.
Add New Comment