User Manual Q&AAnswer
Jan 06, 2025 - 01:06 AM
To connect the Cambridge Audio Minx Air 200 Speaker to your Wi-Fi network, follow these steps:
1. Make sure you have a broadband internet connection and a wireless network set up in your home.
2. Connect the Minx Air 200 Speaker to a power source using the provided power cord.
3. Press the power button on the top of the speaker to turn it on.
4. Wait for the LED light on the rear panel of the speaker to start flashing green and orange. This indicates that the speaker is ready to connect to a network.
5. On your computer or mobile device, go to the Wi-Fi/network settings and select the network named "Air_XXX" (replace XXX with the unique serial number of your speaker).
6. Open a web browser and enter "http://192.168.1.1/" in the address bar. This will load the setup page for the speaker.
7. Follow the on-screen instructions to connect the speaker to your Wi-Fi network. You may need to enter your Wi-Fi password during this process.
8. After a few seconds, the LED light on the rear of the speaker will turn solid green, indicating a successful connection to the network.
9. You can now use your Minx Air 200 Speaker to stream music wirelessly from your computer or mobile device.
Note: If the LED light on the rear of the speaker continues flashing green, there may be a problem with the network connection. Make sure your router is powered on and within range of the speaker. You can also try resetting the speaker by pressing and holding the Standby/On button and WPS button on the rear panel for 10-15 seconds, then repeating the connection process.
For more detailed instructions and troubleshooting tips, refer to the user guide provided with the Cambridge Audio Minx Air 200 Speaker.
Add New Comment