User Manual Q&AAnswer
Jan 06, 2025 - 01:01 AM
To connect your iPhone to the DBPOWER RD828 projector using WiFi, follow these steps:
1. Make sure both your iPhone and the projector are connected to the same WiFi network.
2. On the projector's main interface, select the "Settings" icon in the upper-right corner.
3. Press the "OK" key on the remote control to enter the settings interface.
4. Select the "WiFi Setting" sub-menu.
5. In the list of available WiFi networks, select the network you want to connect to.
6. If prompted, enter the password for the WiFi network.
7. Once the connection is established, you should see a confirmation message on the projector.
8. On your iPhone, open the Control Center by swiping down from the top-right corner (on iPhone X or later) or swiping up from the bottom (on older iPhone models).
9. Tap on the "Screen Mirroring" or "AirPlay" option.
10. A list of available devices will appear. Select the name of the DBPOWER RD828 projector.
11. Your iPhone screen should now be mirrored on the projector.
Note: The fluency of screen mirroring with wireless connection may be affected by the network environment. It is recommended to have a bandwidth of 100Mbps or more for optimal performance. Also, make sure your iPhone is in close proximity to the projector, within 1 meter.
Please refer to the user guide for more detailed instructions and troubleshooting tips.
Add New Comment