User Manual Q&AAnswer
Jan 06, 2025 - 12:42 AM
Sure! Here are the step-by-step instructions for installing the Rockford Fosgate T152-S 2-Way Component Speaker System in your vehicle, as provided in the instruction manual:
1. Before beginning the installation, disconnect the negative lead from the battery to prevent any damage to the unit, fire, or possible injury.
2. Determine where you want to mount the speakers. Ensure that the mounting location is large enough and deep enough for the speakers to fit properly. If mounting in a door, operate all functions (windows, locks, etc.) through their entire operating range to ensure there are no obstructions.
3. Refer to the specification chart in the manual to determine the proper diameter hole to cut for your speaker model. Cutting and mounting templates can be found at rockfordfosgate.com.
4. Mark the locations for the mounting screws and drill the holes using a 1/8" bit.
5. Feed the speaker wires through the cutout and connect them to the speaker terminals. Be sure to observe proper polarity when connecting the wires (the speaker's positive terminal is indicated with a "+").
6. Fit the trim ring over the speaker and mount it into place using four screws. Tighten the screws until the speaker is snug in place to prevent rattling, but do not over tighten them.
7. For the tweeter, determine the mounting location and ensure it is deep enough for the speaker to fit. Mark the location for the mounting hole and drill it using a standard 1.75 inch (45mm) hole saw.
8. Secure the inner cup of the tweeter from the front of the door panel to the outer cup from the back of the door panel using a single center xxxx . Tighten the xxxx until balanced pressure is applied to both faces of the mounting surface.
9. Feed the speaker wires through the cutout and connect them to the speaker terminals, observing proper polarity (the speaker's lead wires are indicated with a red wire "+" and a black wire "-").
10. Snap the tweeter into place and secure it with a snap-on trim ring. The protective grille on the tweeter is non-removable and an integral part of the design.
These are the basic steps for installing the Rockford Fosgate T152-S 2-Way Component Speaker System in your vehicle. For more detailed instructions and illustrations, please refer to the instruction manual provided with the product.
Add New Comment