User Manual Q&AAnswer
Jan 06, 2025 - 12:35 AM
To connect your NEC VT695 XGA LCD Multimedia Projector to your computer, follow these steps:
1. Ensure that both the projector and your computer are turned off.
2. Locate the VGA or HDMI port on your computer. The VGA port is typically blue, while the HDMI port is rectangular and labeled "HDMI."
3. Connect one end of the VGA or HDMI cable to the corresponding port on your computer.
4. Locate the VGA or HDMI input port on the projector. It is usually labeled "Computer In" or "RGB In" for VGA, and "HDMI" for HDMI.
5. Connect the other end of the VGA or HDMI cable to the corresponding input port on the projector.
6. Turn on your computer and the projector.
7. Use the projector's remote control or the control panel buttons to select the appropriate input source. For VGA, select "Computer" or "RGB," and for HDMI, select "HDMI."
8. Adjust the projector's focus and zoom if necessary to obtain a clear image.
For more detailed instructions and troubleshooting information, please refer to the user manual of the NEC VT695 XGA LCD Multimedia Projector provided in the link.
Add New Comment