User Manual Q&AAnswer
Jan 06, 2025 - 12:11 AM
To connect your Epson EX90 XGA Multimedia Projector to your computer, follow these steps:
1. Ensure that your computer and projector are turned off.
2. Connect one end of the VGA cable (not included) to the VGA port on the back of the projector.
3. Connect the other end of the VGA cable to the VGA port on your computer.
4. If your computer has a DVI output, you will need a VGA to DVI adapter (not included) to connect the projector.
5. Once the VGA cable is securely connected, turn on your computer.
6. Turn on the projector by pressing the Power button on the control panel or the remote control.
7. Use the Source Search button on the control panel or the remote control to select the Computer/Component input source.
Note: If you are using a Macintosh computer, you may need to use a Macintosh adapter (not included) to connect the projector.
For more detailed instructions and troubleshooting tips, refer to the Epson EX90 XGA Multimedia Projector User's Guide.
Add New Comment