User Manual Q&AAnswer
Jan 05, 2025 - 11:59 PM
To connect your Toshiba TDP-T45 data projector to your computer, follow these steps:
1. Ensure that your computer and the projector are both turned off.
2. Locate the VGA or HDMI port on your computer. The VGA port is typically blue, while the HDMI port is rectangular and labeled "HDMI."
3. Connect one end of the VGA or HDMI cable to the corresponding port on your computer.
4. Locate the VGA or HDMI input port on the back of the projector. It is labeled "Computer In" or "HDMI In."
5. Connect the other end of the VGA or HDMI cable to the corresponding input port on the projector.
6. Turn on your computer and the projector.
7. Press the "Input" or "Source" button on the projector's control panel or remote control to select the input source as "Computer" or "HDMI," depending on the cable you used.
8. Adjust the projector's focus and zoom settings, if necessary, to ensure a clear image.
For more detailed instructions and troubleshooting tips, please refer to the Toshiba TDP-T45 Data Projector Owner's Manual, specifically the section on "Connecting the Projector to a Computer" (refer to page numbers in the manual).
Add New Comment