User Manual Q&AAnswer
Jan 05, 2025 - 11:54 PM
To connect your laptop to the InFocus IN3124 DLP Projector, follow these steps:
1. Make sure both your laptop and the projector are powered off.
2. Locate the VGA or HDMI port on your laptop. The IN3124 projector supports both VGA and HDMI connections.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your laptop.
4. Locate the VGA or HDMI input port on the back of the projector.
5. Connect the other end of the VGA or HDMI cable to the input port on the projector.
6. Power on your laptop and the projector.
7. On the projector's remote control, press the "Source" button to select the input source (VGA or HDMI) you connected your laptop to.
8. If necessary, adjust the projector's settings to optimize the display, such as resolution and aspect ratio.
For more detailed instructions and troubleshooting tips, please refer to the InFocus IN3124 DLP Projector User Manual, specifically the "Connecting a Computer" section on pages 17-19.
Add New Comment