User Manual Q&AAnswer
Jan 05, 2025 - 11:16 PM
To connect the Rockville CC525T ceiling speakers to an amplifier, follow these steps:
1. Start by drilling a hole in the ceiling where you want to install the speakers. Make sure the amplifier is unplugged and turn off the breaker for safety.
2. Attach the speaker wires to the terminals on the back of the speakers. The positive wire should be connected to the positive terminal, and the negative wire should be connected to the negative terminal.
3. Take the opposite end of the speaker wires and attach them to the corresponding terminals on the amplifier. The positive wire should be connected to the positive terminal, and the negative wire should be connected to the negative terminal.
4. Once all the connections are secure, turn on the amplifier and test the speakers by playing audio. Adjust the volume and settings on the amplifier as needed.
Note: It's important to follow the wiring instructions provided in the manual and ensure proper polarity when connecting the wires to the speakers and amplifier.
For more detailed instructions and illustrations, please refer to the Rockville CC525T 5.25-inches Ceiling Speakers Owner's Manual, available at the following link: [Link to the manual](https://manuals.plus/wp-content/uploa...)
Add New Comment