User Manual Q&AAnswer
Jan 05, 2025 - 10:46 PM
To connect the Rockville RWB70B Wakeboard 360° Swivel Tower Speakers to a stereo, you will need to follow these steps:
1. Identify the positive and negative terminals on the speakers. The positive terminal is usually marked with a "+" symbol, while the negative terminal is marked with a "-" symbol.
2. Locate the corresponding positive and negative terminals on your stereo amplifier or receiver.
3. Strip a small portion of insulation from the end of the speaker wire.
4. Connect the positive wire from the speaker to the positive terminal on the amplifier/receiver, and the negative wire from the speaker to the negative terminal on the amplifier/receiver. Ensure that the connections are secure and tight.
5. Repeat the above steps for the second speaker, if applicable.
6. Once the wiring is complete, power on your stereo system and play some audio to test the speakers.
It is important to note that these speakers are passive, meaning they require an external amplifier or receiver to power them. Ensure that your amplifier or receiver is compatible with the power requirements of the speakers for optimal sound performance.
For additional information and detailed instructions, please refer to the user manual provided with the Rockville RWB70B Wakeboard 360° Swivel Tower Speakers.
Add New Comment