User Manual Q&AAnswer
Jan 05, 2025 - 10:23 PM
To set up and calibrate the Garmin AA4272 Rugged Dive Computer, please follow the steps below:
1. Power On: Press and hold the Power button until the device powers on.
2. Language Selection: Use the Up and Down buttons to select your preferred language, then press the Enter button.
3. Units of Measure: Use the Up and Down buttons to select your preferred units of measure (imperial or metric), then press the Enter button.
4. Date and Time: Use the Up and Down buttons to set the date and time. Press the Enter button to confirm each setting.
5. Dive Mode Selection: Use the Up and Down buttons to select the desired dive mode (Air, Nitrox, Gauge, or Freedive), then press the Enter button.
6. Gas Mix Selection (Nitrox Mode): If you selected Nitrox mode, you can set up to three gas mixes. Use the Up and Down buttons to select a gas mix, then press the Enter button. Set the oxygen percentage and maximum operating depth for each gas mix, then press the Enter button to confirm.
7. Dive Planner: The dive planner allows you to plan a dive based on your current settings. Use the Up and Down buttons to adjust the dive parameters, then press the Enter button to view the planned dive profile.
8. Compass Calibration: To calibrate the compass, hold the device level and rotate it in a figure-eight motion until the compass calibration screen appears. Follow the on-screen instructions to complete the calibration.
9. Alarms and Settings: Use the Up and Down buttons to navigate through the various settings, such as alarms, backlight, time format, and more. Press the Enter button to access and modify each setting.
10. Dive Log: After each dive, the Garmin AA4272 Rugged Dive Computer automatically logs your dive data. To view the dive log, press the Log button. Use the Up and Down buttons to scroll through the log entries.
For more detailed instructions and information, please refer to the Garmin AA4272 Rugged Dive Computer User Guide provided in the link you shared.
Add New Comment