User Manual Q&AAnswer
Jan 05, 2025 - 10:04 PM
To connect your Pyle PDA46BT amplifier to your speakers, follow these steps:
1. Make sure the amplifier is turned off and unplugged from the power source.
2. Identify the speaker outputs on the back panel of the amplifier. There should be a left channel output and a right channel output.
3. Connect the positive (+) terminal of your left speaker to the left channel output on the amplifier. The positive terminal is usually marked with a "+" symbol or a red color.
4. Connect the negative (-) terminal of your left speaker to the corresponding negative terminal on the left channel output of the amplifier. The negative terminal is usually marked with a "-" symbol or a black color.
5. Repeat steps 3 and 4 for the right speaker, connecting it to the right channel output on the amplifier.
6. Ensure that the speaker connections are secure and that the wires are not touching each other.
7. Plug in the amplifier to a power source and turn it on.
8. Adjust the volume and other settings on the amplifier as desired.
Please refer to the user manual for more detailed instructions and illustrations on connecting your amplifier to speakers.
Add New Comment