User Manual Q&AAnswer
Jan 05, 2025 - 10:03 PM
To install the CERWIN VEGA V465 2-Way Coaxial Speakers in your vehicle, please follow these steps:
1. Start by disconnecting the negative terminal of your vehicle's battery to prevent any electrical mishaps during the installation process.
2. Locate the speaker mounting locations in your vehicle. The CERWIN VEGA V465 speakers are designed to fit into standard 6x9-inch speaker openings.
3. Remove any existing speakers from the mounting locations, if applicable. This may involve unscrewing screws or unclipping panels.
4. Connect the speaker wires from your vehicle's wiring harness to the speaker terminals on the back of the CERWIN VEGA V465 speakers. Ensure that the positive (+) and negative (-) terminals are correctly matched.
5. Securely mount the speakers into the speaker openings using the provided screws or any necessary mounting brackets. Make sure the speakers are properly aligned and centered.
6. Once the speakers are securely mounted, reconnect the negative terminal of your vehicle's battery.
7. Test the speakers by turning on your vehicle's audio system. Adjust the volume and balance settings to ensure that the speakers are functioning correctly.
For more detailed instructions and illustrations, please refer to the CERWIN VEGA V465 2-Way Coaxial Speakers User Manual provided in the link above.
Add New Comment