How do I install the Theater Solutions TSLCR5 in-wall speakers? (Theater Solutions TSLCR5 Wall Speaker Operational Manual)

Answer

manuals.plus

Jan 05, 2025 - 09:57 PM


To install the Theater Solutions TSLCR5 in-wall speakers, follow these steps:

1. Determine the desired location for the speakers on the wall or ceiling. Make sure there is enough space and that the speakers will be positioned at the recommended angle (between 90 and 110 degrees from the listener's location).

2. Use the provided cut-out templates to mark the speaker hole size on the wall or ceiling. The recommended rectangular speaker hole size is 16.25" x 7.5".

3. Cut the speaker holes using a suitable cutting tool, following the marked templates.

4. Connect the speaker wires from your home audio receiver or amplifier to the spring-loaded wire terminals on the back of the speakers. Ensure proper polarity (positive to positive, negative to negative).

5. Securely mount the speakers into the cut-out holes using the unique Pressure Lock Mounting System. The speakers should clamp tight to the drywall without the need for additional hardware.

6. If desired, paint the durable ABS housings and removable grills to match your decor.

7. Repeat the installation process for each speaker in your setup.

For more detailed instructions and illustrations, please refer to the provided Instruction Manual included in the box.

Note: It is recommended to consult a professional installer if you are unsure about the installation process or if you have specific requirements for your setup