User Manual Q&AAnswer
Jan 05, 2025 - 09:53 PM
To install the Rockford Fosgate T1572 2-Way Full-Range Speaker, follow these steps:
1. Disconnect the negative lead from the battery before starting the installation for safety.
2. Carefully read and understand the instructions provided in the manual.
3. Determine the mounting location for the speakers, ensuring there is enough space and no obstructions.
4. Use the provided templates to mark the locations for the mounting screws.
5. Drill the holes using a 1/8" bit.
6. Feed the speaker wires through the cutout and connect them to the speaker terminals, observing proper polarity.
7. For models with slotted holes, fit the speaker into the cutout and install the screws in the slots at the top and bottom. Rotate the speaker to align with the remaining mounting holes and tighten the screws.
8. For models with a trim ring, fit the trim ring over the speaker and mount it into place using four screws.
9. Tighten the screws until the speaker is snug in place to prevent rattling, but avoid over-tightening.
Please refer to the manual for additional information and illustrations on the installation process.
Add New Comment