User Manual Q&AAnswer
Jan 05, 2025 - 09:41 PM
To connect your device to the Epson POWERLITE 970 Multimedia Projector, follow these steps:
1. Make sure the projector and your device are turned off.
2. Locate the appropriate input ports on the projector. The POWERLITE 970 offers various input options, including HDMI, VGA, and USB.
3. Depending on the type of connection you want to use, prepare the necessary cables. For HDMI, use an HDMI cable. For VGA, use a VGA cable. For USB, use a USB cable.
4. Connect one end of the cable to the corresponding port on your device (e.g., HDMI port on your laptop).
5. Connect the other end of the cable to the corresponding input port on the projector.
6. Turn on your device and the projector.
7. Use the projector's remote control or the control panel on the projector to select the correct input source. You can refer to the "Selecting the Image Source" section in the user's guide for detailed instructions on how to do this.
8. Once the input source is selected, you should see the content from your device displayed on the projector screen.
Please note that the specific steps and available input options may vary depending on the model and configuration of your Epson POWERLITE 970 Multimedia Projector. For more detailed instructions and illustrations, refer to the user's guide provided with the product.
Add New Comment