User Manual Q&AAnswer
Jan 05, 2025 - 09:30 PM
To connect your ViewSonic PJD8653WS DLP Projector to your computer, please follow these steps:
1. Ensure that your computer and projector are turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and the projector.
6. On your computer, go to the display settings and select the appropriate display mode for the projector (e.g., extended display or duplicate display).
7. Adjust the projector settings, if necessary, to ensure the best display quality.
For more detailed instructions and illustrations, please refer to the user guide for the ViewSonic PJD8653WS DLP Projector. You can find the user guide at the following link: [ViewSonic PJD8653WS DLP Projector User Guide](https://manuals.plus/wp-content/uploa...)
Please note that the specific steps may vary depending on your computer's operating system and the available ports on your computer and projector.
Add New Comment