User Manual Q&AAnswer
Jan 05, 2025 - 09:20 PM
To install and mount the Garmin ECHOMAP UHD 73cv and its Keyed-Assist transducer, please follow the steps outlined in the owner's guide provided in the link above. Here is a summary of the installation process:
1. Determine the mounting location: Choose a location on your boat where the ECHOMAP unit will have a clear view of the water and is easily accessible for operation.
2. Mount the transducer: The transducer should be mounted on the transom of the boat, preferably in a location where it is submerged in water at all times. The owner's guide provides detailed instructions on how to mount the transducer using the included hardware.
3. Connect the transducer to the ECHOMAP unit: Once the transducer is mounted, connect the transducer cable to the appropriate port on the back of the ECHOMAP unit. The owner's guide provides illustrations and descriptions of the ports and connectors.
4. Mount the ECHOMAP unit: Use the included mounting bracket and hardware to securely mount the ECHOMAP unit in the desired location on your boat. The owner's guide provides step-by-step instructions on how to attach the mounting bracket and secure the unit.
5. Connect the power cable: Connect the power cable to the ECHOMAP unit and to a power source on your boat. The owner's guide provides information on the required power supply and how to connect the cable.
6. Turn on the ECHOMAP unit: Once everything is properly installed and connected, turn on the ECHOMAP unit and follow the on-screen prompts to set up and configure the device.
For more detailed instructions, including illustrations and diagrams, please refer to the owner's guide provided in the link above.
Add New Comment