User Manual Q&AAnswer
Jan 05, 2025 - 09:18 PM
To program channels into the Raymarine E70493 VHF Radio, please follow these steps:
1. Turn on the radio by rotating the power/volume xxxx clockwise.
2. Press the "MENU" button on the front panel to enter the menu mode.
3. Use the up and down arrow keys to navigate through the menu options and select "CHANNELS" by pressing the "ENT" button.
4. Use the up and down arrow keys to select the desired channel number you want to program.
5. Press the "ENT" button to confirm your selection.
6. Use the up and down arrow keys to select the desired frequency for the channel.
7. Press the "ENT" button to confirm the frequency selection.
8. Repeat steps 4 to 7 for each channel you want to program.
9. Once you have programmed all the desired channels, press the "MENU" button to exit the menu mode.
Now you should be able to easily switch between the programmed channels by rotating the channel selector xxxx on the front panel of the radio.
For more detailed instructions and illustrations, please refer to the Raymarine E70493 VHF Radio User Guide, specifically the section on "Programming Channels" (refer to page numbers mentioned in the manual).
Add New Comment