User Manual Q&AAnswer
Jan 05, 2025 - 08:44 PM
To connect the Atlantic Technology 334SB Powered Subwoofer to your surround sound receiver/processor, follow these steps:
1. Locate the low-level output on your surround sound receiver/processor. This is usually labeled as "Sub Out" or "LFE Out".
2. Use a high-quality shielded RCA cable to connect the low-level output of your surround sound receiver/processor to the L/Mono input jack on the back of the subwoofer. If your receiver/processor has stereo subwoofer outputs, you can connect them to both the L/Mono and R jacks on the back of the subwoofer.
3. Make sure all other connections to the subwoofer are made before connecting the power cord. This will prevent any accidental activation of the subwoofer while wiring.
4. Connect the power cord to an AC outlet.
5. Turn on your surround sound receiver/processor and set the subwoofer output level to your desired level. Consult your receiver/processor manual for instructions on how to adjust the subwoofer output level.
By following these steps, you should be able to successfully connect the Atlantic Technology 334SB Powered Subwoofer to your surround sound receiver/processor and enjoy enhanced bass performance in your home theater system.
Add New Comment