User Manual Q&AAnswer
Jan 05, 2025 - 08:43 PM
To connect the Pyle PSMSP6 Home Theater Wooden Bookshelf Speakers to your amplifier, follow these steps:
1. Make sure your amplifier or receiver is turned off and unplugged.
2. Identify the speaker terminals on the back of your amplifier. These are usually labeled as "Speaker Out" or "Speaker Output."
3. Determine the impedance rating of your speakers (8 ohms for the PSMSP6 model).
4. Use speaker wire to connect the positive terminal of the left speaker to the positive terminal of the left channel on your amplifier. The positive terminal is usually indicated by a red color or a "+" symbol.
5. Connect the negative terminal of the left speaker to the negative terminal of the left channel on your amplifier. The negative terminal is usually indicated by a black color or a "-" symbol.
6. Repeat steps 4 and 5 for the right speaker, connecting it to the right channel on your amplifier.
7. Ensure that the wire connections are secure and there are no loose strands of wire that could cause a short circuit.
8. Double-check that the impedance of your speakers matches the amplifier's specifications. The PSMSP6 speakers have an impedance of 8 ohms, so make sure your amplifier is compatible with this impedance.
9. Once the speakers are connected, you can turn on your amplifier and adjust the volume to your desired level.
Please refer to the Pyle PSMSP6 Home Theater Wooden Bookshelf Speakers user manual for additional information and illustrations on connecting the speakers to your amplifier.
Add New Comment