User Manual Q&AAnswer
Jan 05, 2025 - 08:26 PM
To install the ArchiTech X-4BULK 6.5" Premium Series Ceiling Speakers, follow these steps:
1. Begin by cutting the holes in the ceiling where you want to install the speakers. It is recommended to initially cut smaller holes and prepare the remaining part before making the final cut.
2. Take a piece of batting insulation that is larger than the hole and put it through the hole in the drywall above. This will help to prevent any damage to the area above and can be left in place as the blown-in insulation will house the speaker.
3. Once the holes are prepared, mount the speakers into the ceiling by following the instructions provided in the installation guide that comes with the speakers.
4. Connect the speaker wires to the speakers. Ensure that the positive and negative terminals are correctly matched.
5. Run the speaker wires through the ceiling and connect them to your audio source or amplifier.
6. Once the speakers are securely mounted and the wires are connected, test the speakers to ensure they are working properly.
It is important to note that for a successful installation, it is recommended to refer to the specific installation guide provided with the ArchiTech X-4BULK 6.5" Premium Series Ceiling Speakers
Add New Comment