User Manual Q&AAnswer
Jan 04, 2025 - 06:19 AM
To connect your to your computer, follow these steps:
1. Make sure both your computer and the projector are turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and the projector.
6. On your computer, go to the display settings. This can usually be done by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
7. In the display settings, select the option to extend or duplicate the display. This will allow you to use the projector as an additional display.
8. Adjust the projector settings if necessary. You can refer to the user manual for detailed instructions on adjusting the display settings on the projector.
Please note that the specific steps may vary depending on your computer's operating system and the ports available on your computer and projector. It is recommended to consult the user manual for your specific model for detailed instructions and troubleshooting tips.
Add New Comment