How do I install the Hifonics ZS65CXS Zeus Coaxial Car Speakers in my vehicle? (Hifonics ZS65CXS Zeus Coaxial Car Speakers User Guide)

Answer

manuals.plus

Jan 04, 2025 - 05:52 AM

To install the Hifonics ZS65CXS Zeus Coaxial Car Speakers in your vehicle, follow these steps:

1. Confirm speaker fit: Make sure you have purchased the correct size speakers for your vehicle. If you're unsure, it's recommended to consult a professional installer.

2. Remove factory speakers: Most factory speakers are located behind interior panels. Access and remove the factory door speakers by removing the door panel. Rear speakers are usually accessed from the trunk or by removing side panels.

3. Check fit and wiring: Once the factory speakers are removed, check if the new speakers fit properly and have enough clearance. Roll the window up and down while holding the speaker in place to test the fit. If necessary, use factory harness boots and grommets for wiring.

4. Coaxial installation: Depending on the factory location, follow these steps:
- Factory location behind the door panel: Connect the positive and negative wires to the proper terminals on the speaker. Securely xxxx the speaker into place and replace the door panel.
- Factory location behind a small panel: Connect the positive and negative wires to the proper terminals on the speaker. Securely xxxx the speaker into place and replace the speaker cover panel.
- Custom location: If your vehicle doesn't have a designated speaker location, professional installation is recommended.

5. Rear factory locations: Mount the speakers in the same way the factory speakers were mounted. Attach the positive and negative wires to the proper terminals. Ensure all wires are secured properly.

For more detailed information and specifications, refer to the Hifonics ZS65CXS Zeus Coaxial Car Speakers User Guide provided on the Hifonics website.