User Manual Q&AAnswer
Jan 04, 2025 - 05:44 AM
To install the Hifonics ZS46CX coaxial speakers in your car, follow these steps:
1. Confirm that you have purchased the correct size speakers for your vehicle.
2. Consult a professional audio installer if you are unsure about the installation process or if your vehicle requires special tools to remove interior panels.
3. Remove the factory speakers by accessing them through the door panel or rear trunk area, depending on the location.
4. Check the fit of the new speakers and ensure there is enough depth clearance. You can do this by rolling the window down and back up while holding the speaker in place.
5. Connect the positive and negative wires of the new speakers to the proper terminals.
6. Securely xxxx the speakers into place.
7. Replace the door panel or speaker cover panel.
8. If your vehicle does not have a door speaker location, consider seeking professional help for custom installations.
9. For rear factory locations, mount the speakers in the same way as the factory speakers and secure the wires properly.
10. For more detailed information and specifications, refer to the user manual provided by Hifonics.
Please note that it is always recommended to consult a professional installer for assistance to ensure proper installation and avoid any potential damage to your vehicle.
Add New Comment