User Manual Q&AAnswer
Jan 04, 2025 - 05:22 AM
To connect your Optoma TH1020 Multimedia Projector to your computer, follow these steps:
1. Ensure that your computer and projector are both powered off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Power on your computer and projector.
6. On your computer, go to the display settings and select the appropriate display mode for the projector (e.g., duplicate, extend, or projector only).
7. Adjust the projector's focus and zoom settings, if necessary, to achieve the desired image size and clarity.
For more detailed instructions and troubleshooting tips, please refer to the user manual of the Optoma TH1020 Multimedia Projector. You can find the manual at the following link: [Optoma TH1020 Multimedia Projector User Manual](https://manuals.plus/wp-content/uploa...)
Add New Comment