User Manual Q&AAnswer
Jan 04, 2025 - 05:21 AM
To connect your laptop to the Hitachi CP-X4014WN LCD projector, follow these steps:
1. Make sure both your laptop and the projector are turned off.
2. Locate the VGA or HDMI port on your laptop. The VGA port is a blue trapezoid-shaped connector, while the HDMI port is a small rectangular connector.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your laptop.
4. Locate the VGA or HDMI input port on the back of the projector. It should be labeled as "Computer In" or "HDMI In."
5. Connect the other end of the VGA or HDMI cable to the input port on the projector.
6. Turn on your laptop and the projector.
7. On the projector's remote control, press the "Input" button to select the appropriate input source (VGA or HDMI) that matches the connection you made.
8. If necessary, adjust the display settings on your laptop to ensure the image is being output to the projector. This can usually be done by pressing the "Windows" key + "P" on a Windows laptop or by going to System Preferences > Displays on a Mac.
For more detailed instructions and illustrations, please refer to the user manual of the Hitachi CP-X4014WN LCD projector.
Add New Comment