User Manual Q&AAnswer
Jan 04, 2025 - 05:20 AM
To connect your Epson VS335W LCD projector to your computer, follow these steps:
1. Make sure your computer and projector are both turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and projector.
6. On your computer, go to the display settings. This can usually be done by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
7. In the display settings, select the option to detect or identify the external display. This will allow your computer to recognize the projector.
8. Once the projector is detected, you can choose to extend or duplicate your computer's display onto the projector.
9. Adjust the focus and other settings on the projector as needed.
For more detailed instructions and troubleshooting tips, refer to the Epson VS335W LCD Projector User's Guide provided in the link above.
Add New Comment