User Manual Q&AAnswer
Jan 04, 2025 - 05:08 AM
To pair the camera and monitor for the Panasonic KX-HNC301W Video Baby Monitor with Remote Pan, please fol7low the steps below:
1. Ensure that both the camera and monitor are connected to power sources and turned on.
2. On the monitor, press the MENU button to access the menu.
3. Use the navigation buttons (up, down, left, right) to select "Camera" and press the OK button.
4. Select "Add Camera" and press the OK button.
5. The monitor will start searching for available cameras. On the camera unit, press and hold the PAIRING button until the LED indicator starts flashing.
6. Once the camera is detected, the monitor will display the camera's ID number.
7. Use the navigation buttons to select the camera's ID number and press the OK button to confirm.
8. The monitor will display "Pairing Complete" when the camera and monitor are successfully paired.
Note: If you have multiple cameras, repeat the above steps for each camera you want to pair with the monitor.
For more detailed instructions and troubleshooting information, please refer to the Panasonic KX-HNC301W Video Baby Monitor with Remote Pan Owner's Guide provided in the link.
Add New Comment