How do I install the Monoprice 115700 Carbon Fiber In-Wall Column Speaker? (Monoprice 115700 In-Wall Speaker Operational Guide)

Answer

manuals.plus

Jan 04, 2025 - 05:06 AM

To install the Monoprice 115700 Carbon Fiber In-Wall Column Speaker, follow these steps:

1. Start by locating a suitable location on your wall for the speaker. Use a stud finder to ensure you are not drilling into any electrical wires or plumbing pipes.

2. Once you have determined the location, use the included cutout template to mark the outline of the speaker on the wall. Make sure the template is level and centered.

3. Use a drywall cutter to carefully cut along the marked outline. Take your time and make precise cuts to ensure a clean installation.

4. After cutting the hole, strip the insulation from the speaker wires and connect them to the speaker terminals on the back of the speaker. Use wire strippers to remove the insulation and connect the wires securely.

5. Once the wires are connected, align the speaker with the cutout hole and use a Phillips screwdriver to secure the speaker to the wall using the easy install mounting tabs.

6. Finally, attach the removable grille to the speaker using the powerful magnets. The grille is paintable, so you can match it to your wall's color and make it blend seamlessly into your home's decor.

Note: It is recommended to use tools such as a stud finder, carpenter's level, marking pen or pencil, wire strippers, and a Phillips screwdriver for the installation process.

For more detailed instructions and illustrations, please refer to the Monoprice 115700 Carbon Fiber In-Wall Column Speaker Operational Guide that comes with the product.