User Manual Q&AAnswer
Jan 04, 2025 - 04:44 AM
To adjust the crossover frequency on the Rockford Fosgate P500-12P Punch Subwoofer System, follow these steps:
1. Locate the crossover adjustment xxxx on the amplifier.
2. Turn the crossover adjustment xxxx all the way down (counterclockwise) to the minimum setting.
3. Play audio through the system.
4. Slowly turn the crossover adjustment xxxx up (clockwise) until you reach the desired crossover frequency.
5. The crossover frequency can be adjusted between 50Hz and 200Hz. Find the sweet spot that suits your audio preferences.
Note: The crossover is set to Low Pass (LP) only on this subwoofer system. Adjusting the crossover frequency allows you to control the range of frequencies that the subwoofer reproduces. Experiment with different settings to find the best balance for your audio setup.
Add New Comment