User Manual Q&AAnswer
Jan 04, 2025 - 03:55 AM
To connect your laptop to the ViewSonic PJD6352LS projector using an HDMI cable, please follow these steps:
1. Make sure your laptop and the projector are both powered off.
2. Locate the HDMI input port on the back of the projector. It should be labeled as "HDMI IN."
3. Connect one end of the HDMI cable to the HDMI output port on your laptop.
4. Connect the other end of the HDMI cable to the HDMI input port on the projector.
5. Power on both your laptop and the projector.
6. On your laptop, press the appropriate key combination (e.g., Fn + F4 or Fn + F8) to switch the display output to the external monitor or projector. This key combination may vary depending on your laptop model.
7. The projector should automatically detect the HDMI input signal and display the content from your laptop.
For more detailed instructions and troubleshooting tips, please refer to the user guide provided with the ViewSonic PJD6352LS projector. You can access the user guide by clicking on the link provided above.
Add New Comment