User Manual Q&AAnswer
Jan 04, 2025 - 03:54 AM
To connect your Sony VPLEX4 LCD Projector to your computer, follow these steps:
1. Ensure that your computer and the projector are both turned off.
2. Locate the computer's video output port. This is usually a VGA or HDMI port on the back or side of the computer.
3. Connect one end of the appropriate video cable (VGA or HDMI) to the computer's video output port.
4. Locate the corresponding video input port on the projector. This is usually labeled as "Computer In" or "RGB In."
5. Connect the other end of the video cable to the projector's video input port.
6. If you are using a VGA cable, you will also need to connect the audio cable from the computer's audio output port to the projector's audio input port.
7. Once all the connections are made, turn on the computer and the projector.
8. Use the projector's remote control to select the correct input source. Press the "Input" or "Source" button on the remote control until the computer input is selected.
9. Adjust the projector's focus and keystone correction, if necessary, to ensure a clear and properly aligned image.
For more detailed instructions and illustrations, please refer to the Sony VPLEX4 LCD Projector user manual, specifically the sections related to "Connecting to a Computer" or "Input/Output Connections." You can find the manual at the following link: [Sony VPLEX4 LCD Projector User Manual](https://manuals.plus/wp-content/uploa...)
Add New Comment