User Manual Q&AAnswer
Jan 04, 2025 - 03:32 AM
To pair the Pyle PHBT6R Sound 6 Wireless Stereo Headphones with your mobile phone, please follow these steps:
1. Ensure that the headset is turned off.
2. Place the headset and the mobile phone within one meter of each other and in a visible range.
3. Press and hold the Multifunction button (MFB) on the headset for 3 seconds until the LED quickly flashes blue and red, and a "beep" is heard.
4. Activate the Bluetooth function on your mobile phone. Refer to your mobile phone's user guide for specific instructions on how to do this.
5. Set your mobile phone to search for Bluetooth devices within range.
6. From the list of devices shown on your mobile phone, select "PHBT6" to pair with the headset.
7. Enter the passcode "0000" if prompted and press "OK" to complete the pairing process.
8. Once the pairing is successful, the LED on the headset will flash blue regularly, indicating that the headset is in standby mode.
9. You can now go back to your mobile phone's main menu and start using the headset for audio playback and calls.
Note: The pairing mode will last for 5 minutes. If the pairing fails, the headset will automatically turn off. After the initial connection, the headset will automatically seek the last device it was connected to when turned on, as long as the device is in range.
For more detailed instructions and troubleshooting tips, please refer to the owner's manual provided.
Add New Comment