User Manual Q&AAnswer
Jan 04, 2025 - 03:15 AM
To connect the Ultrak L10-WBR Wireless Button to the receiver, please follow these steps:
1. Make sure the receiver is turned on and within the operating range of 30 meters/100 feet from the button.
2. On the receiver, locate the button pairing button or channel selection button.
3. Press and hold the pairing button on the receiver until the LED indicator starts flashing.
4. On the wireless button, locate the pairing button.
5. Press and hold the pairing button on the wireless button until the LED indicator starts flashing.
6. The LED indicators on both the receiver and the wireless button should start flashing rapidly, indicating that they are in pairing mode.
7. Wait for a few seconds until the LED indicators on both devices stop flashing and remain solid, indicating a successful connection.
8. Repeat the above steps if you want to connect additional wireless buttons to the same receiver (up to 10 buttons can be connected).
Please refer to the Ultrak L10-WBR Wireless Button Instruction Guide for more detailed instructions and illustrations.
Add New Comment