User Manual Q&AAnswer
Jan 04, 2025 - 03:12 AM
To connect your Epson VS210 Portable SVGA 3-LCD Projector to your computer, follow these steps:
1. Make sure your computer and projector are both turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the computer's port and the other end to the projector's port.
4. Turn on your computer and wait for it to fully boot up.
5. Turn on the projector by pressing the Power button.
6. Use the projector's remote control or control panel to select the correct input source. For VGA connection, select "Computer" or "RGB"; for HDMI connection, select "HDMI".
7. Adjust the focus and other settings on the projector as needed.
8. On your computer, go to the display settings and configure the projector as an extended display or duplicate the screen, depending on your preference.
9. Play the content you want to project on your computer, and it should be displayed on the projector.
For more detailed instructions and troubleshooting tips, please refer to the Epson VS210 Portable SVGA 3-LCD Projector Instruction Manual.
Add New Comment