User Manual Q&AAnswer
Jan 04, 2025 - 03:08 AM
To connect the Pioneer TS-WX400DA subwoofer to your car audio system, follow these steps:
1. Start by locating the RCA input on the subwoofer. This is where you will connect the RCA cables from your car audio system.
2. Next, locate the RCA output on your car audio system. This is where you will connect the other end of the RCA cables.
3. Connect one end of the RCA cables to the RCA output on your car audio system and the other end to the RCA input on the subwoofer.
4. If your car audio system has a separate subwoofer output, you can connect the subwoofer directly to that output using an RCA cable.
5. Once the RCA cables are connected, you can connect the wire harness to the subwoofer. This will provide power to the subwoofer.
6. If you want to control the bass level from the driver's seat, you can connect the wired digital bass remote control to the subwoofer using the attached 16.25' cable.
7. Finally, make sure to secure the subwoofer in your vehicle using the mounting feet and screws provided. This will ensure that it stays in place while driving.
By following these steps and referring to the instruction manual, you should be able to successfully connect the Pioneer TS-WX400DA subwoofer to your car audio system.
Add New Comment