User Manual Q&AAnswer
Jan 04, 2025 - 02:47 AM
To connect your NEC NP905 Portable Projector to your computer, follow these steps:
1. Make sure your computer and projector are turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and projector.
6. On your computer, go to the display settings. This can usually be done by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
7. In the display settings, select the option to extend or duplicate the display to the projector. This will vary depending on your operating system.
8. Adjust the projector settings if necessary. You can use the projector's remote control or the control panel on the projector itself to adjust settings such as brightness, contrast, and keystone correction.
For more detailed instructions and troubleshooting tips, please refer to the user manual of the NEC NP905 Portable Projector. You can find the manual at the following link: [NEC NP905 Portable Projector User's Manual](https://manuals.plus/wp-content/uploa...)
Add New Comment