User Manual Q&AAnswer
Jan 04, 2025 - 02:08 AM
To program channels on the Motorola CP200d UHF Two Way Radios, follow these steps:
1. Turn on the radio by rotating the On/Off/Volume xxxx clockwise.
2. Press the Menu button to enter the menu mode.
3. Use the Up or Down arrow buttons to navigate to the "Program Radio" option and press the Select button.
4. Enter the radio's programming mode by pressing the Select button again.
5. Use the Up or Down arrow buttons to select the desired channel number or frequency.
6. Press the Select button to confirm the selection.
7. Use the Up or Down arrow buttons to navigate to the "Channel Name" option and press the Select button.
8. Enter the desired channel name using the keypad. Press the Select button to confirm.
9. Repeat steps 5-8 to program additional channels if needed.
10. Press the Menu button to exit the programming mode.
Once you have programmed multiple channels, you can switch between them by rotating the Channel xxxx on the top of the radio. Each channel has a corresponding number or name displayed on the radio's screen.
For more detailed instructions and information, please refer to the user guide provided for the Motorola CP200d UHF Two Way Radios.
Add New Comment