User Manual Q&AAnswer
Jan 04, 2025 - 01:47 AM
To charge the Nyko Power Kit battery, follow these steps:
1. Connect the charge cable to the battery pack. Make sure the Nyko logo and LED indicators are facing up toward the face of the controller.
2. Insert the plug tip of the charge cable directly through the opening on the battery compartment into the USB port on the battery pack.
3. The animated orange LEDs on the battery pack will indicate that the battery is charging.
4. A single green LED will indicate that the battery is fully charged.
5. It may take up to 6 hours to fully charge a depleted battery pack.
6. It is recommended to fully charge the battery pack before first use.
7. If the battery is stored and not used, it may lose its charge, so it is advisable to recharge it prior to use.
8. Take care when connecting the charge cable to the charging port to avoid damage to the USB connector. Avoid applying excessive force on the plug body or tip, as they are small and delicate.
For more information and visual references, please refer to the Nyko 86103 Power Kit Rechargeable with Micro-USB Charging user manual provided.
Add New Comment