Answer

Jan 04, 2025 - 01:42 AM
To connect your Smart UF70 DLP Ultra Short Throw 3000 Projector to your computer, follow these steps:
1. Ensure that both your computer and the projector are powered off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Power on both your computer and the projector.
6. On your computer, go to the display settings and select the appropriate display mode for the projector (e.g., duplicate, extend, or projector only).
7. Adjust the focus and zoom settings on the projector to ensure a clear and properly sized image.
For more detailed instructions and troubleshooting tips, please refer to the Smart UF70 DLP Ultra Short Throw 3000 Projector User Guide, specifically the section on "Connecting the Projector to a Computer" (page number may vary depending on the version of the manual).
Add New Comment